Re: New model for SCP-372
#12Well, i made a first draft based on the description i gave and... don't judge harshly, it's just a first approach.
I uploaded a scan, hope you like the concept (almost a copy but...)
http://img29.imageshack.us/img29/4811/scp372001.jpg
(Notice the yellowness of the 'orb')
Kisses.
I uploaded a scan, hope you like the concept (almost a copy but...)
http://img29.imageshack.us/img29/4811/scp372001.jpg
(Notice the yellowness of the 'orb')
Kisses.
Re: New model for SCP-372
#13Well, it's a step in the right direction, but there's *too* many limbs and the thing it has instead of eyes should be more alien.
I WANT TO [REDACTED] INSIDE TWILIGHT SPARKLE
DRIVER_IRQL_NOT_LESS_OR_EQUAL
Atheros drivers SUCK!
DRIVER_IRQL_NOT_LESS_OR_EQUAL
Atheros drivers SUCK!
Re: New model for SCP-372
#14Well, I think he should consider a limb-number reduction surgery too, but he should have eight pair of limbs...
And about the "eye", Sylocat said it should be a yellow orb in the middle of his head .
I made a second draft, I'll upload it tomorrow.
And about the "eye", Sylocat said it should be a yellow orb in the middle of his head .
I made a second draft, I'll upload it tomorrow.
Re: New model for SCP-372
#158 pairs of limbs, Destructoid.
For the sketch itself, it looks nice, I do have a few minor complaints/suggestions though. The legs seem too short and similar in position with the other pairs. Imo, it'd be a lot more interesting with it having different-sized pairs of limbs relative to its point of body. IE, having two longer and thick legs towards the center, and some thinner and shorter legs towards the front, or arms to guide it along. I also feel the legs are just too short in general, it doesn't seem like it would be easy to skitter over walls and surfaces as fast as it does.
For the sketch itself, it looks nice, I do have a few minor complaints/suggestions though. The legs seem too short and similar in position with the other pairs. Imo, it'd be a lot more interesting with it having different-sized pairs of limbs relative to its point of body. IE, having two longer and thick legs towards the center, and some thinner and shorter legs towards the front, or arms to guide it along. I also feel the legs are just too short in general, it doesn't seem like it would be easy to skitter over walls and surfaces as fast as it does.
It slep time bunner.
Re: New model for SCP-372
#16Uploaded a second sketch I made yesterday, so it does not reflect your last suggestion. Working on a third one with a friend.
You are probably correct, limbs may be too short (can't agree with the comment about dynamics of the limbs, it's just a fault at drawing, not my idea )
To the 'eye'. I think Sylocat leaves no place for doubts, it's an orb in the middle of the head. Here you'll find the second sketch:
http://img26.imageshack.us/img26/4811/scp372001.jpg
Probably hard to distinguish in the scan (and in the paper, lol), but the skin is, instead, streched muscle fibers.
You are probably correct, limbs may be too short (can't agree with the comment about dynamics of the limbs, it's just a fault at drawing, not my idea )
To the 'eye'. I think Sylocat leaves no place for doubts, it's an orb in the middle of the head. Here you'll find the second sketch:
http://img26.imageshack.us/img26/4811/scp372001.jpg
Probably hard to distinguish in the scan (and in the paper, lol), but the skin is, instead, streched muscle fibers.
Re: New model for SCP-372
#17Most interested about the 'Orb' sensory system, my only worry from that is that it might possibly look a bit too much like a cyclops eye if done a bit wrong. Nice work on the sketch though, it's definitely starting to shape up in the right direction.
It slep time bunner.
Re: New model for SCP-372
#18Since all I do is simple assets, I decided I'd try to make a quick version of 372 based off of that epic sketch. I don't normally do organic modeling so I had no idea what I was doing, but the end result wasn't THAT bad so might as well share it.
http://www.mediafire.com/?7801130c5n5phd2
~4k polys. If you have any use for it be my guest ;)
I have all of the low-poly body parts (before smoothing modifier was applied) so if you do decide you want to modify it in some way just let me know and I'll upload that as well.
EDIT: Forgot to mention but I still need to add 372's face to the texture ;)
~4k polys. If you have any use for it be my guest ;)
I have all of the low-poly body parts (before smoothing modifier was applied) so if you do decide you want to modify it in some way just let me know and I'll upload that as well.
EDIT: Forgot to mention but I still need to add 372's face to the texture ;)
Re: New model for SCP-372
#19I think the orb was 372's author's idea.
Administrator at the Official SCP:CB Wiki
Re: New model for SCP-372
#20If you want, i have a model of 372. ill post a DL link so you can mess with it and what not.
http://www.mediafire.com/?x13azj0kd31qx5w
Thats for anyone who wants it. They just need to texture and animate. Enjoy.
http://www.mediafire.com/?x13azj0kd31qx5w
Thats for anyone who wants it. They just need to texture and animate. Enjoy.